Senin, 16 September 2013

How Install (INSTALLATION) floor PARQUET

floor PARQUET
Parquet laminate is composed of several layers of material (because it used words laminate) are glued whole. In general, there are four component layers.

In the lower part is a protective layer from resin melamine-generally used to protect the wood against moisture which caused the floor existing (thefloor of the bottom). Layer on top of it is the ingredient-general MDF (fiberboard medium density) or HDF (fiberboard high density) principal. Layer on top of it is again decorative material. Because MDF and HDF has a smooth surface (step pattern), the pattern of wood needed fact to look at soil in aspect wood natural. Wood layer on ground is usually made of resin. Finally, the top layer is a film transparent used by solid and of protection. With the existence of this film, more scratch-resistant laminate and parquet proof that the solid wood flooring water.


How to put floating Parquet:

1 prosecution uses generally the layer of foam sheet in advance, to avoid unevenness in the floor and sounds scratchy.

2 for ease of pairs, parquet laminate is designed with a system of locking between the tongue and the niche. In a exhibit, the left hand is a language and its right side is a niche; upper side and the side lower the niche of the language. How to install the only piece Insert language in another niche parts.

It is different in each peace from Tile to paste on the floor below. Here adhesive is also necessary, but just to put between parts with other parts ( cammed on language and niche glue)).

In this way, the installation of laminate flooring become easier, like putting a jigsaw puzzle. And in addition to this, because it does not need anybe glued to the lower floor, floor coverings can be applied to soils which have been covered ceramic or other materials.

0 komentar:

Posting Komentar